About the Point System

Point System is an easy to use and maintain tool that allows clients to use it accordingly to the service plan they choose, including personal assistance of our trained and authorized staff.

The system empowers the user with complete control over the vehicle, fleet , or operators allowing :

• • Planning and tracking of each vehicle´s asssignments.
  • Sending and receiving information of specific situations to and from the vehicle (without the driver's knowledge).
• • Define restricted areas to certain vehicles and monitor inflictors.
• • Receive reports on a basis according to the client's needs: daily, weekly, biweekly, or monthly.
• • Establish speed limits and report the number of inflictions by a certain driver, provided by the monitoring sensor that communicates the engine and the tachometer in an analog signal.
• • Obtain information of the kilometers driven.
• • Obtain reports according to client's needs.
• • Know the vehicle's condition in actual time.
• • Immobilize the vehicle.
• • Monitor the vehicle 24 hours a day, 365 days a year.
• • Establish alert routes and rules and/or reports of detouring.
• • Create categorized reports for each driver and vehicle.
  • Use of a pin pad that maintains the vehicle immobilized until the driver introduces the correct pin.
• • Send alert signals when the vehicle transits out of a defined coverage area.

This system could activate the alert signal if:

• • A vehicle has not left a certain area at a predetermined time or has passed the time limit in one stop.
• • A vehicle exceeds normal time between two stops.
• • The impact accident detector alert is set off.
• • The panic button is pushed by the driver, requiring assistance or communication.
• • The mechanic sensors are initiated, including oil, temperature, lights, battery, or other warnings.
• • The signal of open compartments is activated.

This system can also offer the following services:

• • Offers reports of the driver's free time, reminding the driver and the MEC that the vehicle is stopped with the engine on, exceeding the predetermined time.
  • Develops and creates reports using the Fleet Manager software
  • Offers the option of transmitting more than 22 vehicle positions, its speed, and state of a specific transmission.
  • Record and save over 2000 location positions, speed and vehicle's status.
  • Saves approximately 18 days of location data, for 5 minute periods, 8 hours a day, when there is no mobile coverage.
  • Sets the units to transmit in time intervals that range from 10 seconds to 24 hours.
  • Transmits the vehicle's operational status, including ignition, speed, and odometer, among others.

The Point system can be operated from a mobile phone, through the internet, or from the MEC.